OnePlus is set to officially launch their OnePlus 7T series flagship devices on 26th September. We have seen loads of leaks & rumours about these devices that reveal the design and specifications of the phones. Ahead of the official launch, OnePlus has released the official renders of their upcoming flagship revealing the design of the rear panel and confirming the triple camera design. The design matches with the earlier leaks yet is a bit different.

OnePlus 7T Series official Renders

OnePlus 7T Camera a OnePlus 7T series official Renders reveal Rear Camera design 1Looking at these renders, you can see the triple camera module with a circular design having the three camera sensors aligned horizontally in the middle of the circle along with LED flash below. The bump due to camera module is visible and is easily noticeable. OnePlus branding with logo and the company name is present at two places.

OnePlus 7T Camera OnePlus 7T series official Renders reveal Rear Camera design 2

Antenna lines can be seen at the bottom and top side along with Volume rocker buttons in between them. The rear panel comes with a gradient colour design. This rear panel design will be same for both OnePlus 7T and OnePlus 7T Pro.

ALSO READ:  OnePlus 7T series to officially launch on 26th September [updated]

OnePlus 7T Series Specs

In terms of specifications, Rumors indicate that OnePlus 7T sport a 6.55″ 2K Super AMOLED display with a 90hz refresh rate with a smaller notch than OnePlus 7. OnePlus 7T will be powered by a Qualcomm Snapdragon 855+ processor along with 8GB of RAM. It will be available in 128GB/256GB of storage and backed by a 3,800 mAh battery.

Join AndroidPure on Telegram

OnePlus 7T camera specs comprise a 48MP primary camera, with a 16MP lens and a 12MP sensor. The cameras will support Wide-angle video, so we think one of these could be a wide-angle lens, and the other a telephoto lens along with support for slo-mo videos at 960 fps. The selfie camera on the phone is expected to be a 16MP lens. It will be equipped with an in-display sensor like the OnePlus 7.

OnePlus 7T Pro will offer a slightly better hardware including a slightly bigger battery, compared to the standard variant. The leaked Specifications for both the devices are as follows:

OnePlus 7T Specs (Rumoured)

  • Display: 6.55-inch Fluid AMOLED / In-display Fingerprint Sensor (Optical) / 90Hz and HDR10+
  • CPU: Snapdragon 855+ (7nm)
  • GPU: Adreno 640
  • RAM: 8GB
  • ROM: 128GB / 256GB
  • Rear Camera: Main 48MP (f/1.6) with OIS + EIS / Telephoto 12MP (f/2.2) with 2x Zoom / Ultra-Wide 16MP (f/2.2) with 120-degree field of view
  • Front Camera: 16MP (f/2.0) with EIS
  • Battery: 3,800mAh / WARP Charge 30T Fast Charging (20 per cent faster than OnePlus 7 Pro)
  • OS: OxygenOS based on Android 10
  • Misc: New Macro mode for closer shots / Nightscape mode / Super Slow-Motion recording at 960FPS 720p / Matte Glass Back
ALSO READ:  OnePlus 7T Pro specs leaked alongside the McLaren Edition

OnePlus 7T Pro Specs (Rumoured)

  • Display: 6.65-inch Fluid AMOLED / In-display Fingerprint Sensor (Optical) / 90Hz and HDR10+
  • CPU: Snapdragon 855+ (7nm)
  • GPU: Adreno 640
  • RAM: 8GB
  • ROM: 256GB
  • Rear Camera: Main 48MP (f/1.6) with OIS + EIS / Telephoto 8MP (f/2.4) with 3x Zoom / Ultra-Wide 16MP (f/2.2) with 120-degree field of view
  • Front Camera: 16MP (f/2.0) with EIS
  • Battery: 4,085mAh / WARP Charge 30T Fast Charging
  • OS: OxygenOS based on Android 10
  • Misc: New Macro mode for closer shots / Nightscape mode / Super Slow-Motion recording at 960FPS 720p / Matte Glass Back

For latest Android News & reviews, follow AndroidPure on TwitterFacebook, and Subscribe to our YouTube channel. Want any help with your Android Smartphone or Gadgets, Ask your Questions at Androidpure Forum.